• High retention cupped bases and double magnets
• Extremely consistent and predictable pull
• Re-configurable between left and right hand
• High-grade aluminium backplate and bars
• Modular and upgradeable
• Tool-free self-adjustment for all usable cartridge lengths
• Lifetime warranty

Our next-generation Nexus Element Gen II shotgun caddies are focused on retention without compromising your load. Featuring double magnets and cupped bases to grip when it matters. Gen II moves to aluminium backplates and bars, producing the lightest loader we have ever made! Completely UK-made, set-and-forget, switchable between left or right-hand, and available in 8, 12, 20, 28, and 32 options.

The Nexus Element Gen II comes with:

• Your loader
• PS51 Industrial Velcro, cut to size, with an alcohol swab
• Belt clip spacers

We recommend a full belt setup should be a 12 and a 28 loader. This gives your initial load and still enough to complete even the longest of stages.

Nexus Element Gen II is a set and forget system that takes any cartridge with an unfired length from 51-67.5mm (most manufacturers quote the fired cartridge length). That means any cartridge, bird, buck, or slug you would use in training or competition will fit in the Nexus system with no further adjustment. You don't have to commit to loading either right or left-handed, it takes just 10 minutes to convert an assembled Nexus 12 from one hand to the other.

In line with MAGLOAD ethos, the Nexus Element Gen 2 is versatile, well built, easy to use, and is the most affordable system on the market. Compliant with all IPSC and 3 Gun competition rules.

Versatility

• Can be set up right or left-handed. All Nexus Element Gen IIs will be supplied assembled. Your loader can be easily reconfigured between right and left-handed setups.
• Load twins or quads whenever you want.
• Set and forget. Once the loader is assembled, it never needs to be adjusted as it will self adjust to any usable cartridge length and any cartridge on the IPSC or 3 Gun circuit.
• Can be fitted to CLIC, Tek Loks, ELS clips or used with our Velcro Competition belt.
• When empty, the loader collapses to the smallest possible footprint. An empty loader will not get in the way during bending or crouching.
• Low release force and natural release directions.

Construction

• Nexus Element Gen II backplate and bars are constructed from hard anodised aluminium.
• Sintered Nylon 12 tops, bushings and bases. There are no practical limits to the heat or cold to which they can be exposed.
•  Long lasting and corrosion-free springs.

As standard, the Nexus Element Gen II comes with our lifetime warranty.

• Extremely light and predictable pull
• High and adjustable retention
• Lightest self-adjusting loader in the world, from 92g
• Velcro Competition Belt Available Here
• Huge variety of mounting and assembly options
• Tool-free self-adjustment for all usable cartridge lengths

The Nexus PRO is highly decorated, being used by multiple current and past world and national champions, which is why we can confidently call it the Choice of Champions!

The Nexus PRO quadloading system is our ultimate loader, lighter than any other spring adjustable loader on the market. Completely UK made, set-and-forget, left and right-handed shotgun cartridge caddy in 4, 8, 12, 14, 16, 20, 24, 28, and 32 options.

The Nexus PRO comes with:

• Your loader
• PS51 Industrial Velcro, cut to size, with an alcohol swab
• Belt clip spacers
• 10mm and 5mm spring adjustment spacers

We recommend a full belt setup would be a 12 and a 28 loader. This gives your initial load and still enough to complete even the longest of stages. Note: Velcro Competition Belt or belt clips are sold separately.

DESCRIPTION

Nexus PRO is a set and forget system which will take any cartridge with an unfired length from 50-67.5mm (most manufacturers will quote the fired cartridge length in their technical date). That means any cartridge, bird, buck or slug that you would use in training or competition will fit in the Nexus PRO system with no further adjustment. The Nexus system can be set up either left or right-handed and changed at any time using just one Allen key. The Nexus PRO is highly decorated, being used by multiple current and past world and national champions, which is why we can confidently call it the Choice of Champions!

The Nexus PRO is built with IPSC and USPSA in mind and therefore conforms perfectly to IPSC and USPSA rules, but the Nexus PRO is even more suitable to 3 Gun and other disciplines than ever before. Competitors have been using the Nexus PRO in it's 4up and 8up configurations with great success in 3 Gun and other multigun disciplines.

Versatility

• Can be set up right or left-handed
• Load twins or quads whenever you want
• Self adjusts to fit any cartridge used in dynamic shooting
• Can be fitted to CLIC, Tek Loks, ELS clips or our  Velcro Competition belt
• Fully Modular
• Adjustable spring tension and hand clearance
• 4, 8, 12, 14, 16, 20, 24, 28, and 32 round configurations available

Construction

• Aerospace-grade aluminium backplate, hard anodised
• The Nexus PRO is just 50mm from front to back, including cartridges (49mm without). There is no danger of exceeding the IPSC 75mm rules even with a loose belt or a thick attachment mechanism (Tek Lok or Velcro).
• The plastic parts are made using the latest in 3D manufacturing technology. From -50 degrees C, to 150 degrees C; the Nexus PPRO will always work as you expect it to!
• Minimal maintenance is required. Self-cleaning even through the thickest of mud and sand.
• We are using the latest in materials technology to utilise spring systems that will be long lasting and corrosion-free.

Easy to use

• The Nexus PRO can be supplied in a ready-to-assemble state with clear and comprehensive instructions or assembled for you in a right or left-handed configuration.
• Set and forget. Once the loader is assembled it never needs to be adjusted as it will self adjust to any usable cartridge length.
• Low release force and natural release directions.
• When emptied of ammo the loader collapses down to the smallest possible footprint. An empty loader will not get in the way during bending, crouching or any other form of PSG acrobatics.

Weights: PRO4 92g, PRO8 178g, PRO12 265g, PRO14 305g, PRO16g 354, PRO20 428g, PRO24 527g, PRO28 617g, PRO32 695g

As standard, the Nexus PRO comes with our lifetime warranty.

• Secure and easy to use buckle
• Rapid fastening and adjustment
• Premium 6mm thick rubber and cork construction, with a grippy inner surface and genuine Velcro outer
• Compatible with all Nexus and Reflex loaders

SIZING: Measure around where you will wear the belt (around the belly button) + clothes and order the largest belt that will fit you.

The sizes accommodated are:

• Small 26-44" (18" of belt space)
• Medium 34-54" (26" of belt space)
• Large 42-60" (32" of belt space)

Everyone knows how to use a seat belt, and everyone knows how secure a seat belt is. Quick to fasten and quick to adjust. Avoid the faux pas of a belt coming off in IPSC, USPSA and 3 Gun competition by using the MAGLOAD Velcro Competition Belt.

Using our proprietary rubber and cork core construction, we’ve thinned this belt down to a mere 6mm, further reducing weight and increasing your range of movement without sacrificing rigidity for your loaders. 100mm wide genuine Velcro ensures that your loaders and accessories stay where you put them.

Supplied with a Magload PVC Patch and an integrated elastic strap to secure excess webbing.

Nexus PRO loaders are sold separately here

Nexus Element Gen II loaders are sold separately here

Breech Flag and Holder are sold separately here

Note: for the Small size belt, we recommend a maximum two-loader set-up of a 12 and 24, or up to a single 32. Medium and Large sizes will comfortably fit a two-loader set-up of up to a 14 and 32.

The Clic belt clip system is designed specifically for IPSC, 3 Gun and USPSA disciplines to be rock solid on the belt, with the QRB 1.5" or QRB 2.0" accessories becoming quick and easy to remove with the quick-release function. Clic takes up the absolute minimum amount of space, so you can stack them close together if needed, giving you additional room for belt accessories.

There are 4 options of bases, the Solo, QRB 1.5", QRB 2.0", or QRB Velcro:

• Clic Solo - For permanent attachment of accessories.
• Clic QRB 1.5" - Quick release base for standard 1.5" 2-part IPSC belts.
• Clic QRB 2.0" - Adjustable quick-release base for any 1.0"-2.0" belts in 0.25" increments with supplied spacers.
• Clic QRB Velcro - Velcro mounted QRB base for velcro competition belts, velcro applied as standard, screw holes available for fixed mount.

For both QRB bases, there is a range of compatible different-size mounting plates for any application:

• The single-row QRS plate is for all MAGLOAD loaders and other accessories like magazine pouches, with 3x bolt holes.
• The triple-row QRT plate is for people who are moving to this system from a Tek Lok or Hoppner & Schumann belt clip and want the same layout.
• The ball joint QRA plate is for angle-adjustable single-hole mounting such as magazine pouches. Designed specifically for the Double Alpha XiP and Race Master pouches
• The Clic One plate is one plate to fit on all QRB bases, one slot for adjustability and versatility, sized for the QRB 2.0".

Clic uses captured nuts for easy assembly. The clips can be used with hex bolts instead of nuts should you want threaded studs, and can be configured in many ways to suit what you need. All the hardware we supply is marine-grade stainless steel for maximum weather protection. Solo is 60x24mm, 14.5mm deep, and sits 5.5mm from the belt. QRB 1.5" is 60x24mm, 16.5mm deep, and sits 7.5mm from the belt. QRB 2.0" is 72x24mm, 20mm deep, and sits 11mm from the belt. All clips and Solo come with 2x nuts, 2x bolts, and 2x spacers.

• Stiff, rigid with little flex

• Two-part velcro design

• Compatible with CLIC, Double Alpha, Tek Lok and Safariland Belt Clips

• 1.5" Width, rectangular profile

• CLIC security buckle and Magload PVC patch included

Designed from the ground up to be the stiffest, lightest two-piece shooting belt on the market, giving superb support to any accessories you want to mount. Perfect for IPSC, USPSA, 3 Gun, and other competitive shooting disciplines. 

"The Stiffy" 2-part IPSC belt is 1.5" wide and only 0.25" thick, making it compatible with CLIC, Tek Lok, Double Alpha, and Safariland belt clip systems. Ideal for handgun, rifle or shotgun shooting. The two-part design uses the highest quality Velcro to ensure a secure attachment every time. Featuring a 5.5" strip of velcro on the front section for any patches.

The inner belt features a chamfer for easy threading through belt loops, a 1mm polymer reinforcing layer for added stiffness and only 3.25mm thick, comfortably worn over any trouser belt. The outer belt also features a chamfer for easy threading through belt loops, a rectangular profile for accessory stability, a strong 4mm polymer reinforcing core and maximum velcro availability on the back. Included with each belt are a CLIC security buckle and a Magload PVC morale patch. Available sizes are:

• 105cm - (Fits waist size 26-35") - 284g
• 121cm - (Fits waist size 32-41") - 312g
• 136cm - (Fits waist size 38-47") - 325g
• 151cm - (Fits waist size 43-53") - 399g
• 176cm - (Fits waist size 51-63") - 456g

Quick detach CLIC breech flag holders for 12g or .22lr and .223 breech flags, both can also be used as convenient glasses holders! Quickly switch between breech flag holders with CLIC. Compatible with the Magload Clic system, will require a CLIC QRB belt clip attachment or CLIC Security Buckle. 

• CLIC 12g Holder fits Magload 12g flags
• CLIC .22/.223 Holder fits Magload .22 and .223 flags

Click here for the Quick Release Base this clip attaches to.

*flag not included unless selected as an option

• Drop-in kit
• No modifications
• Enlarged release button
• Pre-drilled improved latch

Upgrade your Beretta (A300, A400, and 1301 series) and Armsan A612 shotgun with our drop-in pre-threaded (drilled and tapped) latch and enlarged button kit with no modifications required. In addition to being pre-threaded to attach the supplied enlarged button, the shape and finish of the latch are improved to make loading easier and faster.

The Magload enlarged shotgun bolt release button is designed for speed and control. A larger surface area over standard for better contact and operation with a textured surface for better grip.

Included in the kit are the upgraded latch, retention pin, improved spring, enlarged button, and M3 stainless steel screw.

Lifetime warranty as standard.

• 13g Weight
• 30mm Handle Length
• Mil-Spec Black Nickel Finish
• 10 Sets Customisable Coloured O-Rings Supplied

Engineered for lightness and toughness, our enlarged charging handle comes in at just 13g, the same weight as your stock charging handle, reducing metal fatigue and ensuring the same reliability you are used to from your gun.

Precision machined offering the perfect balance between strength and toughness with a mil-spec black nickel-plated finish to stand up to the most extreme conditions. With a 30mm handle length we believe this is the sweet spot of size, offering enough space to quickly charge the handle whilst not risking snagging on stage furniture.

Combined with our custom rubber o-rings for additional grip you will be confident on even the wettest days. Supplied with 10 different coloured sets of o-rings to add your own personal flair to your gun: White, Black, Red, Yellow, Light Blue, Dark Blue, Orange, Green, Pink and Purple.

Lifetime warranty as standard.

Compatibility List:

Benelli: M2, M2SP, M2 SPEED, M3, SBE, SBEII, SBEIII, Cordoba, Montefeltro, Ethos, SuperSport, and Legacy

Breda: B12i and 930i

Franchi: Variomax, Intensity, Affinity, and I-12

Stoeger: M3000, M3500, and M3K

Beretta 1301/A400: A350 Xtrema 1, A391 Xtrema 2, A400 Xplor, A400 Excel, A400 Xtreme Unico, A400 Xtreme Plus, 1301 Comp, 1301 Comp Pro, 1301 Tactical, and Tx4 Storm

Beretta A300: A300, A303, A390, A391, and A3901

Mossberg: 930 and 940    

• Lightweight and strong polymer construction
• Laser sintered surface for extra grip
• Longer than standard bolt for extra security

Lightweight enlarged shotgun bolt release button for faster bolt release operation. A larger surface area over most standard buttons for better contact and easier operation, with a textured surface for better grip. 

An M3 stainless steel screw is supplied with the button. Will require your existing button to be drilled and tapped with an M3 thread. 

Lifetime warranty as standard

• Consistency of oil with lubricating properties of grease
• High level of corrosion protection
• Extreme temperature performance: From -18C to 230C
• Extremely low “stiction”
• Suitable for a wide range of metals and plastics

MagLube is a high-performance, premium gun oil with the lubricating properties of grease but the consistency of oil. MagLube is for the demanding conditions of practical shooting with high round counts and extreme temperature conditions. Use on all sliding and working parts of the gun and feel the difference instantly.

It maintains extremely high lubricity under all conditions. Even when frozen retains exceptionally low stiction and high lubrication qualities.

Ultra-low stiction, high adhesion, and high shear strength are the main features of Maglube.

•  Low stiction means parts move easier, triggers feel smoother, and actions work more reliably.

• High shear strength means that under the pressure of firing or cycling the oil will continue to lubricate rather than being pushed outwards.

•  High adhesion means even a thin layer will stay where you put it, and continue working until you clean it off.

MagLube holds dirt in suspension. When applied to clean parts, subsequent cleaning just requires a wipe with a dry microfibre cloth or tissue paper, and clean & fresh oil can be reapplied over the top.

Maglube is skin safe for worry-free field stripping.

All sizes have a child-safe cap with a thin-tip applicator for getting to hard-to-reach places.

• High impact polymer
• Will withstand long term use without breaking
• High retention
• 1” hole spacing for easy retrofits
• Cartridge is angled downwards towards chamber for the perfect release
• Relief cuts on the underside to clear features on popular guns without extra filing

The Shot Saver provides that vital shot to cleanly finish a stage when you run dry, potentially saving your match. It can also be used to give a strategic advantage by working it into your stage plan. 

Lightning fast and reliable, it’s always there to save your last shot. You don’t need to take any special care when loading it. Slide or snap your cartridge in, it will work every time.

Made from a high impact polymer, this Shot Saver has been designed not to break. It has 1” hole spacing to easily retrofit to any holes you may already have in the gun. The bottom of the loader has relief cuts to get the most optimal positioning on handguards on some of the most popular guns in use, including the Benelli M2 and Beretta 1301. The cartridge is canted backward towards the chamber and has high retention. The cartridge will always be there when you need it most!

Lifetime warranty as standard.

Note: Also available in 20g, please leave a note on the order if you would like 20g instead (black only)

• Occupies the chamber to show that the chamber is clear
• Compact design
• Flag holder holds all breech flags
• Suitable for all 12g chambers

Suitable for all 12g shotguns, secure the action with the MAGLOAD breech flag!

Featuring a relief to clear the extractor, preventing damage. Designed to have a compact size and accommodate a hole for any keyring you may want to hang from it.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial Velcro and also holes for direct attachment.

• Stainless Steel
• Set of 6 – Full, 3/4, 1/2, 1/4, 1/8, and Cylinder
• Laser Engraved Choke Selection Guide
• Extended For Easy Installation
• MTM Hard Case Included

Extended 12 gauge competition shotgun chokes made to our exact specification, available in the Crio Plus, Mobil, and Optima HP fitments. Each set contains 6 choke tubes to cover every scenario you'll likely find in IPSC, 3Gun, or any dynamic shooting competition, including; Full, 3/4 (Improved Modified), 1/2 (Modified), 1/4 (Improved Cylinder), 1/8 (Skeet), and Cylinder.

Stainless steel construction for all-weather performance and corrosion resistance. No choke key slot to keep muzzle smooth reducing flyers, taper on full length of choke tube for a more consistent pattern. Extended and knurled for easy and toolless installation. Magload lifetime warranty as standard.  

Choke Fitment Guide:

Crio Plus - Benelli M2, Benelli M2 SP, Benelli M2 SPEED, Benelli Nova SPEED, Benelli Montifeltro (2007 onwards), Benelli Cordoba (pre 2006), Benelli Ethos, Benelli Vinci, Benelli Super Black Eagle II & III, Benelli Super Sport, Benelli Ultralite, and Breda B12i

Mobil - Benelli Nova, Benelli Supernova, Benelli M1, Benelli M3, Benelli M4, Benelli Black Eagle I, Benelli Legacy, Benelli Montifeltro (pre 2007), Benelli Super Black Eagle I, Stoeger M3000, Stoeger M3500, Stoeger M3K, Franchi Infinity, Franchi Variomax, Franchi Affinity, Franchi I-12, Beretta A300, Beretta A301, Beretta A302, Beretta 303, Beretta A390, and Beretta 391.

Optima HP - Beretta A400, Beretta 1301, Beretta 1301 Comp Pro    

• Designed to hold a single round as securely as needed
• Folds to only 5.5mm in width
• Industrial 3M adhesive tape supplied
• Fast empty start loads

The most compact and low profile option 3 (empty start) loader on the market. Designed to stay permanently on the gun without getting in the way when not in use. 

The REFLEX Option 3 Loader presents a cartridge just outside the chamber which can be knocked in right after the buzzer on an empty chamber/unloaded start on IPSC and USPSA stages. The loader will naturally fold in only protruding 5.5mm, avoiding any snagging whilst quadloading or operating the gun during the rest of the stage.

Supplied with industrial 3M double-sided tape to allow it to be easily fitted to the gun.

Note: the standard Option 3 Loader is designed for right-handed guns, if you require one for a left-handed gun (ejection from the left-hand side) please leave a note in the order.

• Light weight and strong polymer construction
• Laser sintered surface for extra grip
• Compatible with Benell M2 SP and SPEED
• Streamlined and larger than stock
• Reduce snag risk and reduce interrupted quadloads

Created with the optimal profile for the release button, raising it away from the port and streamlining the shape to move it out of the way of your quadloads and reduce the risk of snagging significantly.

It's much larger than the stock buttons and is designed to be obviously different when it needs pressing (i.e. when you run dry) by touch alone, without having to look at the chamber. Compatible with both the Benelli M2 SP and M2 SPEED.

Lifetime warranty as standard.

• Hyper lightweight
• Low friction self-lubricating nylon
• Durable design
• Extended shape
• Fire red finish

An often overlooked but vital part of your gun. Our Benelli Supernova and Nova Speed followers are slightly oversized for overzealous port jobs, hyper lightweight, and smooth operation, everything a follower needs to be. 

If you suffer from shell surge, a lightweight follower will help and even cure it. If your connection to your magazine tube isn't quite right, the extended shape will help guide the follower without catching.

Made out of lightweight, low friction, and self-lubricating nylon this is a follower you can put your trust in.

Lifetime warranty as standard.

• Extremely Light Weight – 73g for a 500mm (+8rd) tube
• High Strength Carbon Fibre
• Impact-Resistant Polymer

These carbon 12g shotgun magazine extensions are designed to shed weight from the place it affects you the most, resulting in faster transitions and easier gun manipulation by lowering the moving mass. Just 73g on a 500mm tube.

Note: The extension tube will add to the internal standard capacity of the gun; for instance, a Benelli M2 has an internal capacity of 4 rounds, and a +6 extension tube will give 10 rounds total in the magazine tube.

High spec carbon fibre made to our specification with a premium matte finish. The one piece carbon magazine is bonded using cutting edge adhesives used in the automotive industry for sports car chassis.

To calculate the number of rounds, count 60mm per round and +30mm for the spring and follower. For example, for a +8rd tube, you need 8 x 60mm (480mm) plus 30mm which is 510mm. Cut tolerance is +/- 2mm.

For reference, a Beretta 1301 has a standard internal capacity (without an extension tube) of 5, and the Benelli M2 (all variants) has a standard internal capacity of 4. The total capacity of the gun would be the standard internal capacity plus the extension's capacity. For example, if you would like your Beretta 1301 to have a total capacity of 10 you would need a +5 tube. All known standard internal capacities are listed below.

• Benelli M2 (all variants) - 4 rounds
• Benelli M4 - 5 or 7 rounds (depending on variant)
• Benelli Nova - 5 rounds
• Benelli Nova SPEED - 5 rounds
• Benelli Supernova - 5 rounds
• Beretta 1301/Tactical - 5 rounds
• Breda B12i - 4 rounds
• Mossberg 940 / 930 - 4 rounds
• Mossberg 590 - 6-8 rounds
• Stoeger M3000 / M3K - 5 rounds
• Remington 870 - 4 rounds

For any help or recommendations, please don’t hesitate to get in touch using the Contact Us form.

For example, if you wanted an extended shotgun magazine to take your Beretta 1301 Tactical from 5 shell capacity to an extended 7 rounds, you should select a +2 cartridge magazine tube. Magazine spring is sold separately here.

NOTE: 2-3 weeks for delivery, each tube is made to order! Please read the specifications above. As these are custom tubes, we will not be able to accept returns.

• Lightweight polymer - just 12g!
• Stainless steel bolt with brass fittings
• Standard size 26-27mm
• Orlov / Pinyo size 32-33mm

A hyper lightweight barrel clamp to reduce swinging weight where it affects you the most. Protect your magazine extensions from impacts, but if you did happen to impact it the clamp has no edges that can get caught or snagged.

The spacing is designed with our carbon extension tubes in mind and will fit other extensions - the spacing is optimal to prevent your point of impact from being changed.

The geometry of the clamp is designed to mimic a climbing shoe to focus pressure from the bolts along carefully positioned ridges to increase grip.

The clamp should ideally be positioned 7.5cm (3”) from the muzzle.

Lifetime warranty as standard.

• Aluminium Reflex Loader backplates
• Compatible with Reflex Loader

Combine or split out your Reflex Loader modules to a new size with additional backplates.

Made from high-grade aluminium, with a hard black anodised finish.

• Occupies the chamber to show that the chamber is clear
• Suitable for all 12g chambers
• Rail mount for when not in use
• Specifically shaped to clear the extractor
• Flag holder can be attached with velcro (supplied) or by bolting to a Tek Lok or directly to the belt

Secure the action with the Magload rail mount 12g breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.

Want to buy someone a gift but no idea what to get them? Let them choose with a MAGLOAD digital gift card! Never expires, and reusable!

• Precision made polymer
• Temperature stable
• Regain your full sight adjustment range

This pack of 3x sight adjustment shims will allow you to dial in your Vortex red dot sight for bullet drop compensation and sight over bore issues.

Choose between the Razor fitment or Venom fitment.

Pack contains:

2x 0.5 degree shims

1x 1.0 degree shim

• Made from durable and long lasting vinyl
• 1” x 8”
• 10 colours available
• Official Magload font

Our official Magload vinyl sticker, perfectly sized to fit on your shotgun magazine tube, receiver, handguard, stock or even your car!

We’ve been using these stickers for Team Magload, and even with our high standards, they can live up to whatever has been thrown at them.

• Stainless Steel Nexus Element backplates
• Compatible with original Nexus, Nexus Element, Nexus Element Gen II and Nexus Pro

Combine or split out your Nexus Element modules to a new size with additional backplates. Living up to the modularity of the Nexus system, the Nexus Element backplates are 100% backwards compatible with the Original Nexus and Nexus Pro also.

Made from high-grade stainless steel, with a linished finish.

• Worlds First Self Collapsing Loader
• 4, 8 and 12 Capacity Available
• Left/Right Hand Switchable
• Variety Of Mounting Options
• REFLEX Option 3 Loader Available Here

Welcome to REFLEX, the world's first self collapsing quad and dual shotgun loader.

Designed for the 3-Gun and IPSC market the REFLEX loader is available as a 4, 8 or 12 round capacity shotgun caddie which completely folds up after deployment. In the collapsed position the REFLEX becomes the world's smallest loader reducing the chance of snagging and making it far easier to go prone or take other positions during a stage. High strength magnets hold your cartridges in place during high energy movements while the light release force means it’s fast to load from.

Constructed from aerospace-grade hard anodised aluminium and polymer for long lasting and corrosion-free use. Minimal maintenance is required, and self-cleaning even through the thickest of mud and sand. The stainless steel collapsing springs have been heat treated for durability. REFLEX can be configured to be right or left-handed in seconds giving you ultimate flexibility in your competition set-up. Weights: Reflex 12 - 311g, Reflex 8 - 207g and Reflex 4 - 103g

Capable of being mounted with a variety of solutions, including CLIC, Tek Loks, other belt clips and Velcro.

Supplied in the box are 1 x REFLEX loader, 2 x attachment spacers, 1 x Velcro piece and 1 x alcohol wipe Lifetime warranty as standard.

• Beretta Pro style lifter
• Lifter hold-down function
• For 3" and 3.5" chambers
• Genuine Beretta parts #C7C940 and # C7C121
• Drop in, no gunsmithing part
• Easy retrofit

Upgrade your Beretta semi-auto shotgun to include the lifter hold-open function.

These lifters are Pro specification factory parts from Beretta which includes the hold open function, resulting in faster and easier loading. The hold open function uses a specifically designed ramp to interface with the carrier catch to hold the lifter down while loading.

Compatibility

3" chamber models (C7C940): All Beretta semiautomatic shotguns with lifter for 3"/76MM shells in 12 gauge that are equipped as standard with item #C5D552 (or the corresponding trigger group #C8A275 or #C89785), such as:

• 1301 Tactical
• A400 Upland
• A400 Xcel
• A400 Novator
• A400 Xplor
• A400 Lite
• A400 Ultralite
• A300 Outlander

3.5" chamber models (C7C121): This is the lifter introduced with the 1301 Comp PRO, which is compatible with all 3.5" receiver A400 style shotguns, such as:

• 1301 Comp
• 1301 Comp Pro
• A400 Xtreme Plus
• A400 Xtreme Unico
• A400 Xtreme
• A350 Xtreme
• TX4

Part of our CLIC belt clip range, the 12g Holder retains either one (single) or two (double) 12g cartridges for your initial load or for when you've exhausted everything else!

The 12g Holder is quick-release and mounts into the CLIC QRB or CLIC Security Buckle, which can be purchased separately here. Made from a highly durable and lightweight polymer for all conditions. Lifetime warranty as standard.

Click here for the Quick Release Base this clip attaches to.

• Flat and Curved Options
• High-performance polymer adjustable trigger
• Pretravel and overtravel adjustments
• Help with trigger freeze
• Help with prep

A massive improvement over the stock trigger, with tighter tolerances and pretravel/overtravel adjustments. Use this trigger to reduce trigger freeze, improve the feel of the trigger, and aid in prep disengage*.

A small part that makes a big difference to the operation of the gun, using a precision press fit hardened steel pin and stainless grub screws. Additionally, with supporting modifications, it can relieve prep, which is a genuine and proven way to make anyone faster.

The Pretravel adjustment can be used to dial in/out the first stage of the trigger making it a travel adjustable 2 stage trigger. Gone are the days of drilling and tapping your trigger guard for an overtravel stop!

Fits the Supernova only. The package includes the trigger, with pre fitted screws and pin, and a 1.5mm hex key. Installation guide: youtube.com/watch?v=bS30F6bb4WA

*unlocking the gun with rearwards pressure on the pump handle. May need additional supporting mods.

• Hyper lightweight Nexus PRO backplate and bars
• Easy and fast upgrade for the original Nexus and Nexus Element Gen I

Shed significant weight, up to 50%, from your original Nexus and Nexus Element Gen I loader or change the size of your Nexus Pro and Nexus Element Gen II by upgrading it with the Nexus PRO backplate and bars!

Living up to the modularity of the Nexus system, the Nexus PRO components are 100% backwards compatible with the original Nexus and Nexus Element Gen I. Made from aerospace grade aluminium, the bars and backplate also have a hard anodised finish.

• Purpose made for the RS-S1 and VEPR-12
• Significantly easier reloads
• Hyper-lightweight polymer
• Secure dual screw retention

Enlarged magwell for the Armsan RS-S1 and Molot VEPR-12, designed to significantly reduce reload times. Hyper-lightweight, self-lubricating polymer construction. Secure fitment ensured by dual bolt fastening.

Each magwell is hand-checked and comes with a lifetime guarantee!

• Lightweight and strong polymer construction
• Textured surface for extra grip
• Larger than standard bolt for extra security
• Anti-double feed built right in!

Eliminate the common Beretta 1301 double feed malfunction, and enlarged design to give faster operation. A larger surface area over standard for better contact and operation with a textured surface for better grip.

Lifetime warranty as standard.

• 2x 1.1kg release force magnets
• Solid shell retention
• Smooth load of the first shot
• Stays clear for all loading techniques

The Primus loader is a wrist mounted Option 3 (empty start) loader for when the start condition states “no ammunition on the gun”, letting you get the first round loaded as quickly as possible from your wrist or arm. 

With practice, you can load that first shot with a similar movement to a regular Option 3 Loader. Magnets and geometry retain the cartridge securely, yet the directional release lets you drop the round smoothly into the chamber. 

The loader is designed with a low profile and special geometry so that it will not impede smooth quad loading. Lightweight custom blend polymer and a genuine Velcro strap.

“A quick one off the wrist” as recommended by Dave Smith, Rossendale

Lifetime warranty as standard.

• Geometry designed to hold a round as securely as needed
• Easy, directional release
• Self adhesive velcro supplied
• Fast empty start loads

The Option 3 Loader presents a cartridge just outside the chamber which can be instantly inserted on the buzzer during an option 3 empty start. Giving you rock-solid reliability and an effortless directional release. If you don’t have one, you probably should.

Supplied with an industrial self-adhesive Velcro hook and loop fastening to allow it to be easily added and removed from the gun. For a more permanent mount we suggest 3M Licence Plate double-sided foam tape (not supplied).

Check out the newer Reflex Option 3 loader here

Note: the standard Option 3 Loader is designed for right-handed guns. If you require one for a left-handed gun (ejection from the left-hand side), please leave a note in the order.