Clic Belt Clip System

The Clic belt clip system is designed to be rock solid on the belt, with the QRB 1.5″ or QRB 2.0″ accessories becoming quick and easy to remove with the quick-release function. Clic takes up the absolute minimum amount of space so you can stack them close together if needed giving you additional room for belt accessories.

There are 3 options of bases, the Solo, QRB 1.5″, or QRB 2.0″:

• Clic Solo – For permanent attachment of accessories.
• Clic QRB 1.5″ – Quick release base for standard 1.5″ 2-part IPSC belts.
• Clic QRB 2.0″ – Adjustable quick-release base for any 1.0″-2.0″ belts in 0.25″ increments with supplied spacers.

For both QRB bases, there is a range of compatible different-size mounting plates for any application:

• The low profile QRL plate is for the sleekest mounting solutions, with 2x bolt holes it is best for single mag pouches, loaders, and knife holsters.
• The single-row QRS plate is for all MAGLOAD loaders and other accessories, it gives a lot more versatility with 3x bolt holes.
• The triple-row QRT plate is for people who are moving to this system from a Tek Lok or Hoppner & Schumann belt clip and want the same layout.
• The ball joint QRA plate is for angle-adjustable single-hole mounting such as magazine pouches. Designed specifically for the Double Alpha XiP and Race Master pouches
• The Clic One plate is one plate to fit on all QRB bases, one slot for adjustability and versatility, sized for the QRB 2.0″.

Clic uses captured nuts for easy assembly. The clips can be used with hex bolts instead of nuts should you want threaded studs, and can be configured in many ways to suit what you need. All the hardware we supply is marine-grade stainless steel for maximum weather protection.

Solo is 60x24mm, 14.5mm deep, and sits 5.5mm from the belt.

QRB 1.5″ is 60x24mm, 16.5mm deep, and sits 7.5mm from the belt.

QRB 2.0″ is 72x24mm, 20mm deep, and sits 11mm from the belt.

All clips and Solo come with 2x nuts, 2x bolts, and 2x spacers.