• Occupies the chamber to show that the chamber is clear
• Compact design
• Flag holder holds all breech flags
• Suitable for all 12g chambers

Suitable for all 12g shotguns, secure the action with the MAGLOAD breech flag!

Featuring a relief to clear the extractor, preventing damage. Designed to have a compact size and accommodate a hole for any keyring you may want to hang from it.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial Velcro and also holes for direct attachment.

• High impact polymer
• Will withstand long term use without breaking
• High retention
• 1” hole spacing for easy retrofits
• Cartridge is angled downwards towards chamber for the perfect release
• Relief cuts on the underside to clear features on popular guns without extra filing

The Shot Saver provides that vital shot to cleanly finish a stage when you run dry, potentially saving your match. It can also be used to give a strategic advantage by working it into your stage plan. 

Lightning fast and reliable, it’s always there to save your last shot. You don’t need to take any special care when loading it. Slide or snap your cartridge in, it will work every time.

Made from a high impact polymer, this Shot Saver has been designed not to break. It has 1” hole spacing to easily retrofit to any holes you may already have in the gun. The bottom of the loader has relief cuts to get the most optimal positioning on handguards on some of the most popular guns in use, including the Benelli M2 and Beretta 1301. The cartridge is canted backward towards the chamber and has high retention. The cartridge will always be there when you need it most!

Lifetime warranty as standard.

Note: Also available in 20g, please leave a note on the order if you would like 20g instead (black only)

• Extremely Light Weight – 73g for a 500mm (+8rd) tube
• High Strength Carbon Fibre
• Impact-Resistant Polymer

These carbon 12g shotgun magazine extensions are designed to shed weight from the place it affects you the most, resulting in faster transitions and easier gun manipulation by lowering the moving mass. Just 73g on a 500mm tube.

Note: The extension tube will add to the internal standard capacity of the gun; for instance, a Benelli M2 has an internal capacity of 4 rounds, and a +6 extension tube will give 10 rounds total in the magazine tube.

High spec carbon fibre made to our specification with a premium matte finish. The one piece carbon magazine is bonded using cutting edge adhesives used in the automotive industry for sports car chassis.

To calculate the number of rounds, count 60mm per round and +30mm for the spring and follower. For example, for a +8rd tube, you need 8 x 60mm (480mm) plus 30mm which is 510mm. Cut tolerance is +/- 2mm.

For reference, a Beretta 1301 has a standard internal capacity (without an extension tube) of 5, and the Benelli M2 (all variants) has a standard internal capacity of 4. The total capacity of the gun would be the standard internal capacity plus the extension's capacity. For example, if you would like your Beretta 1301 to have a total capacity of 10 you would need a +5 tube. All known standard internal capacities are listed below.

• Benelli M2 (all variants) - 4 rounds
• Benelli M4 - 5 or 7 rounds (depending on variant)
• Benelli Nova - 5 rounds
• Benelli Nova SPEED - 5 rounds
• Benelli Supernova - 5 rounds
• Beretta 1301/Tactical - 5 rounds
• Breda B12i - 4 rounds
• Mossberg 940 / 930 - 4 rounds
• Mossberg 590 - 6-8 rounds
• Stoeger M3000 / M3K - 5 rounds
• Remington 870 - 4 rounds

For any help or recommendations, please don’t hesitate to get in touch using the Contact Us form.

For example, if you wanted an extended shotgun magazine to take your Beretta 1301 Tactical from 5 shell capacity to an extended 7 rounds, you should select a +2 cartridge magazine tube. Magazine spring is sold separately here.

NOTE: 2-3 weeks for delivery, each tube is made to order! Please read the specifications above. As these are custom tubes, we will not be able to accept returns.

• Lightweight polymer - just 12g!
• Stainless steel bolt with brass fittings
• Standard size 26-27mm
• Orlov / Pinyo size 32-33mm

A hyper lightweight barrel clamp to reduce swinging weight where it affects you the most. Protect your magazine extensions from impacts, but if you did happen to impact it the clamp has no edges that can get caught or snagged.

The spacing is designed with our carbon extension tubes in mind and will fit other extensions - the spacing is optimal to prevent your point of impact from being changed.

The geometry of the clamp is designed to mimic a climbing shoe to focus pressure from the bolts along carefully positioned ridges to increase grip.

The clamp should ideally be positioned 7.5cm (3”) from the muzzle.

Lifetime warranty as standard.

• Hyper lightweight
• Low friction self-lubricating nylon
• Durable design
• Extended shape
• Fire red finish

An often overlooked but vital part of your gun. Our Benelli Supernova and Nova Speed followers are slightly oversized for overzealous port jobs, hyper lightweight, and smooth operation, everything a follower needs to be. 

If you suffer from shell surge, a lightweight follower will help and even cure it. If your connection to your magazine tube isn't quite right, the extended shape will help guide the follower without catching.

Made out of lightweight, low friction, and self-lubricating nylon this is a follower you can put your trust in.

Lifetime warranty as standard.

• Designed to hold a single round as securely as needed
• Folds to only 5.5mm in width
• Industrial 3M adhesive tape supplied
• Fast empty start loads

The most compact and low profile option 3 (empty start) loader on the market. Designed to stay permanently on the gun without getting in the way when not in use. 

The REFLEX Option 3 Loader presents a cartridge just outside the chamber which can be knocked in right after the buzzer on an empty chamber/unloaded start on IPSC and USPSA stages. The loader will naturally fold in only protruding 5.5mm, avoiding any snagging whilst quadloading or operating the gun during the rest of the stage.

Supplied with industrial 3M double-sided tape to allow it to be easily fitted to the gun.

Note: the standard Option 3 Loader is designed for right-handed guns, if you require one for a left-handed gun (ejection from the left-hand side) please leave a note in the order.

• Stainless Steel
• Set of 6 – Full, 3/4, 1/2, 1/4, 1/8, and Cylinder
• Laser Engraved Choke Selection Guide
• Extended For Easy Installation
• MTM Hard Case Included

Extended 12 gauge competition shotgun chokes made to our exact specification, available in the Crio Plus, Mobil, and Optima HP fitments. Each set contains 6 choke tubes to cover every scenario you'll likely find in IPSC, 3Gun, or any dynamic shooting competition, including; Full, 3/4 (Improved Modified), 1/2 (Modified), 1/4 (Improved Cylinder), 1/8 (Skeet), and Cylinder.

Stainless steel construction for all-weather performance and corrosion resistance. No choke key slot to keep muzzle smooth reducing flyers, taper on full length of choke tube for a more consistent pattern. Extended and knurled for easy and toolless installation. Magload lifetime warranty as standard.  

Choke Fitment Guide:

Crio Plus - Benelli M2, Benelli M2 SP, Benelli M2 SPEED, Benelli Nova SPEED, Benelli Montifeltro (2007 onwards), Benelli Cordoba (pre 2006), Benelli Ethos, Benelli Vinci, Benelli Super Black Eagle II & III, Benelli Super Sport, Benelli Ultralite, and Breda B12i

Mobil - Benelli Nova, Benelli Supernova, Benelli M1, Benelli M3, Benelli M4, Benelli Black Eagle I, Benelli Legacy, Benelli Montifeltro (pre 2007), Benelli Super Black Eagle I, Stoeger M3000, Stoeger M3500, Stoeger M3K, Franchi Infinity, Franchi Variomax, Franchi Affinity, Franchi I-12, Beretta A300, Beretta A301, Beretta A302, Beretta 303, Beretta A390, and Beretta 391.

Optima HP - Beretta A400, Beretta 1301, Beretta 1301 Comp Pro    

• Occupies the chamber to show that the chamber is clear
• Suitable for all 12g chambers
• Rail mount for when not in use
• Specifically shaped to clear the extractor
• Flag holder can be attached with velcro (supplied) or by bolting to a Tek Lok or directly to the belt

Secure the action with the Magload rail mount 12g breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.

• Geometry designed to hold a round as securely as needed
• Easy, directional release
• Self adhesive velcro supplied
• Fast empty start loads

The Option 3 Loader presents a cartridge just outside the chamber which can be instantly inserted on the buzzer during an option 3 empty start. Giving you rock-solid reliability and an effortless directional release. If you don’t have one, you probably should.

Supplied with an industrial self-adhesive Velcro hook and loop fastening to allow it to be easily added and removed from the gun. For a more permanent mount we suggest 3M Licence Plate double-sided foam tape (not supplied).

Check out the newer Reflex Option 3 loader here

Note: the standard Option 3 Loader is designed for right-handed guns. If you require one for a left-handed gun (ejection from the left-hand side), please leave a note in the order.

• Flat and Curved Options
• High-performance polymer adjustable trigger
• Pretravel and overtravel adjustments
• Help with trigger freeze
• Help with prep

A massive improvement over the stock trigger, with tighter tolerances and pretravel/overtravel adjustments. Use this trigger to reduce trigger freeze, improve the feel of the trigger, and aid in prep disengage*.

A small part that makes a big difference to the operation of the gun, using a precision press fit hardened steel pin and stainless grub screws. Additionally, with supporting modifications, it can relieve prep, which is a genuine and proven way to make anyone faster.

The Pretravel adjustment can be used to dial in/out the first stage of the trigger making it a travel adjustable 2 stage trigger. Gone are the days of drilling and tapping your trigger guard for an overtravel stop!

Fits the Supernova only. The package includes the trigger, with pre fitted screws and pin, and a 1.5mm hex key. Installation guide: youtube.com/watch?v=bS30F6bb4WA

*unlocking the gun with rearwards pressure on the pump handle. May need additional supporting mods.