• Firing Pin and Spring
• Heat Treated Steel
• Improved Design for Reliability
• Enlarged Hammer Contact Area
• Dry fire safe

The Magload RELIAPIN is an upgraded firing pin and spring for your .22lr rifle. Designed for greater reliability and longevity, our heat-treated steel firing pin won't let you down. Reduce both firing pin and firing pin spring breakages with the RELIAPIN! Special material, geometry and spring means that the RELIAPIN will last much longer than other pins. The improved hammer contact area and firing pin protrusion are tuned for reliability for when you need it the most. Available for:

• Smith and Wesson M&P 15-22
• CMMG .22 Conversion Kit and Bolt
• Kriss Defiance DMK
• Sig Sauer 522

The 15-22 Reliapin features an enlarged hammer contact area giving greater reliability with all aftermarket AR15 triggers. Proprietary improved firing pin & spring included with all firing pins. Developed with and tested by some of the best shooters in the world. Safe for dry fire!

• 45-degree reduced throw
• High-quality polymer construction
• Ambidextrous
• Long and short levers included

Reduce the throw of your safety to 45 degrees to increase speed and ease of operation. Fully ambidextrous for both right and left-handed setups.

The control surfaces are plastic, so they keep a consistent temperature whether in cold or hot weather and stay grippy when wet in the rain. Manufactured using high-quality polymer, reinforced with a brass thread insert, with a choice of long or short offhand levers, you can be ready to go with a Magload 45-degree safety.

Compatible with all mil-spec AR15s, the Kriss Defiance and Gen 3 (serial numbers 18,000 and above) Tippmann M4-22.

Lifetime warranty as standard.

• Occupies the chamber to show the chamber is clear
• Suitable for all .22 chambers
• Rail mount for when not in use
  
• Optional flag holder

Secure the action with the rail mount .22 breech flag! Designed to stand off from the bolt face to protect your extractor and a relief cut on the underside to protect barrel mounted ejectors, such as the one on a Smith and Wesson M&P 15-22.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection, or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.

• Fits All AR-15s, 15-22, Kriss Defiance & Tippmann M4-22
• Oversized Right Side Button
• 3 Button Styles Supplied (Flat, Curved and Honeycomb)
• Drop-In Upgrade No Modification Necessary

The Magload enlarged AR15 magazine release button set is compatible with ALL mil-spec AR-15 lowers, including the Smith & Wesson 15-22, Kriss Defiance, and Tippmann M4-22.

3 different omnidirectional button shapes, oversized that can be pushed from multiple directions, are included to suit you and your rifle (flat, curved, and honeycomb), treat yourself to a variety of colour choices.

Dual screw design for easy and secure fitment.

Fit within seconds with absolutely no modification necessary and all tools included!

• AR-22 Magazine Adapters
• Better-Mag Replacement
• Range Of Fitments

Add-on adapters for our AR-22 Magazine for use with mil-spec AR-15s (without the Better-Mag Adapter), Tippmann M4-22, Kriss Defiance DMK, JP Enterprises JP-22, and Nordic Components NC-22/22RB. Easily and quickly clip into the AR-22 Magazine to give compatibility to a range of rifles, unscrew the two halves of the magazine and slot it into place. Retain the last round bolt hold open with our AR-22 Bolt Catch. Adapters:

• #1 AR-15 Mil-Spec
• #2 JP Enterprises JP-22 / Nordic Components NC-22/22RB
• #3 Tippmann M4-22
• #4 Kriss Defiance DMK

Don’t call it a charger or a clip, it’s a magazine!  

• Low Profile Mil-Spec Magwell

• D50/D60 Compatible

• Hyper lightweight polymer

• Secure retention

D50/D60 compatible low profile magwell for mil-spec AR-15 rifles. The low profile magwell maintains our tried and tested loading geometry in a smaller and lighter package to decrease your reload times significantly.

Hyper lightweight and constructed from self-lubricating polymer that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!

Each magwell is hand-checked and comes with a lifetime guarantee.

• Ultra lightweight
• Optimised sight picture for IPSC
• Low profile
• Tough Polymer Construction

Purpose built flip-up sights for IPSC/USPSA rifle and mini rifle, low profile and ultra lightweight. Ideal for a first set of primary IPSC sights or backup/offset sights. With both front and rear sights being elevation and windage adjustable you can find the perfect position for your eye and cheek weld. Front Sight:

• Ultra-lightweight 14.8g
• NATO / Picatinny rail mount
• Pro P4 style post, 2.5mm post with 1.5mm aperture, always in the centre of the hood
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

Rear Sight:

• Ultra-lightweight 14.2g
• NATO / Picatinny rail mount
• 1.75mm aperture with single light trap
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

45 Degree Offset

• Same sights as above
• Front 16.5g, rear 15.9g
• Calculated sight position to be a perfect 45 degree rotation from the centre of the bore

• Highly configurable for your perfect sight picture
• Lockable elevation and windage with configurable 1/2, 1/4 & 1/8 MOA adjustments
• Return-to-zero lockable sight elements
• Auto-adjusting for backlash and wear

Purpose built sights for IPSC Mini Rifle, with a wealth of features specific to the discipline. Front Sight:

• Lightweight
• Direct barrel mount
• Fits 1", 3/4" and 11/16" barrels using included reducing collars (25.4mm, 19.05mm, 17.1mm), custom collars also available (Max 25.4mm)
• Supplied with 15 interchangeable return-to-zero post inserts (A1-A8, P1-P5, C1 & C2)
• Compatible with Magload return-to-zero metal sight elements (not supplied)
• Adjustable and lockable elevation, supplied with 1/8, 1/4 and 1/2 MOA adjustment dials
• Configurable for open hood, closed hood (tunnel) and with swappable window inserts to adjust light levels
• Hood is always concentric to the insert or element aiming point
• Auto-adjusting for backlash and wear
• Modular and upgradeable/repairable

Rear Sight:

• Lightweight
• NATO / Picatinny rail mount
• Supplied with 8 quick change, return-to-zero anti-glare sight tubes (1.2mm, 1.5mm, 1.75mm and 2.0mm in small and large tube sizes)
• Double light trap at the rear of the anti glare tubes for high contrast sight picture
• Sight tube lockable (some disassembly required)
• Ambidextrous windage dials, configurable for both left-only or right only
• Adjustable and lockable windage, configurable for 1/4 or 1/2 MOA adjustments
• Adjustable and lockable elevation, supplied with 1/8, 1/4 and 1/2 MOA adjustment dials
• Auto-adjusting for backlash and wear
• Modular and upgradeable/repairable

Front Pro Mini Rifle Rear Sight is pictured with the C2 sight post, inspired by IPSC Standard Rifle World Champion Sami Hautamaki. Both front and rear Pro Mini Rifle Sights are shipped with 1/4 MOA adjustments on all axes, and can be reconfigured with the supplied parts. Rear Pro Mini Rifle Sight is shipped in an ambidextrous configuration and can be reconfigured left/right with the included single sided lead screw. Front Sight Posts:

• Occupies the chamber to show the chamber is clear
• Suitable for all .223 chambers
• Rail mount for when not in use
• Specifically shaped to clear the extractor
• Optional flag holder

Secure the action with the Magload breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel-locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro for easy mounting.

• Fits All AR-15s, 15-22, Kriss Defiance & Tippmann M4-22
• Low Profile Left Side Button
• Oversized Right Side Button
• 3 Button Styles Included (Flat, Curved and Honeycomb)
• Drop-In Upgrade No Modification Necessary

The Magload ambidextrous magazine catch is compatible with ALL mil-spec AR-15 lowers, including the Smith & Wesson 15-22, Kriss Defiance, and Tippmann M4-22. 3 different omnidirectional button shapes are included to suit you and your rifle (flat, curved, and honeycomb), treat yourself to a variety of colour choices.

This ambi mag release gives you a low-profile left-hand button and an oversized right-hand button that can be pushed from multiple directions.

Dual screw design for easy and secure fitment. Fit within seconds with absolutely no modification necessary and all tools included. Lifetime warranty as standard.

• Hyper-lightweight
• Designed specifically for .22lr and .22 WMR
• Available in 1/2x20 UNF and 1/2x28 UNEF threads
• Available in 3/4" and 1" sizes

We took compensator science back to its roots to use the small amount of gas produced by a .22 round, bringing you a compensator that will keep your muzzle perfectly flat.

SLS printed to create geometry that’s impossible to machine, keep weight down, and make it economically priced. 

Both 3/4" and 1" brakes come with a timing nut for proper alignment with the barrel.

Available in 1/2x20 UNF and 1/2x28 UNEF threads.

• UNEF fits most AR-15 type .22 rifles - We can confirm the Smith and Wesson 15-22, Kriss Defiance, and Tippman M4-22 have 1/2x28 UNEF threads.

• UNF fits most other .22 rifles - We can confirm the Ruger 10/22 has 1/2x20 UNF threads.

Torture tested with a rapid 500 rounds and guaranteed for 10,000 rounds:

• Enlarged and flared for the fastest reloading possible
• Designed specifically for the unique BAD receiver design
• Hyper-lightweight polymer construction
• Secure clamshell retention

Enlarged and flared magwell for the unique Battle Arms Development receiver design. Including the Authority Elite, OIP, and Ambi. Featuring geometry for maximum compatibility with the Magpul D60/D50 drum magazine!

Hyper-lightweight, self-lubricating polymer will never slow you down. Security is ensured by a dual bolt fastening clamshell design. 

Each magwell is hand-checked and comes with a lifetime guarantee!

• +7rd extension gives you 17rds total
• Highly durable and lightweight polymer
• Base and follower kit
• +6 extensions for 25 round magazines available here

Easily increase your Smith & Wesson M&P 15-22 10-round magazine from 10 rounds to 17 rounds with our +7 extension base. This enables you to maximise the rounds in the magazine while still being low-profile enough to go prone.

The minimal added length is enough to get in and out of a magwell comfortably, while the extra weight encourages it to drop free when released. High durability and low friction polymer construction.

It is recommended to use an external load assist device with this kit, as the original load assist button is no longer used.

Note: Compatible with 10-round 15-22 magazine only, 25-round extensions can be found here.

Note: Magazine not included

• +6rd extension
• Highly durable and lightweight polymer
• Stackable (with correct spring)

Tested and developed with Rifle World Champion Jarkko Laukia, our +6rd PMAG extensions will fit all Gen M3 PMAGs and extend their capacity by 6 rounds.

Made out of durable and lightweight polymer. Fixed by a secure, strong single screw lock. Compatible with Ranger bases and similar accessories.

The extensions can be stacked to fine tune your mag length for a stage if needed. Generally, the stock spring in a magazine is good for 1x extension, so if you have a 20 round mag and you extend it to 32, you need a spring from a 30 round mag. This would in theory enable you to add a third extension with this same spring.

(Magazine & spring not included)

• Hyper lightweight polymer
• Secure retention
• Clamshell shell design

Competition Magwell for the Battle Arms Development XIPHOS 9 Rifle PCC receiver. Hyper lightweight, self-lubricating polymer will never slow you down. Security is ensured by a clamshell design that hugs the contours of the original magwell. Designed like all our products for low drag - as little as possible to catch or snag!

Made using our high-tech material processes with our specially selected polymers, each magwell is hand-checked and comes with a lifetime guarantee!