The Clic belt clip system is designed specifically for IPSC, 3 Gun and USPSA disciplines to be rock solid on the belt, with the QRB 1.5" or QRB 2.0" accessories becoming quick and easy to remove with the quick-release function. Clic takes up the absolute minimum amount of space, so you can stack them close together if needed, giving you additional room for belt accessories.

There are 4 options of bases, the Solo, QRB 1.5", QRB 2.0", or QRB Velcro:

• Clic Solo - For permanent attachment of accessories.
• Clic QRB 1.5" - Quick release base for standard 1.5" 2-part IPSC belts.
• Clic QRB 2.0" - Adjustable quick-release base for any 1.0"-2.0" belts in 0.25" increments with supplied spacers.
• Clic QRB Velcro - Velcro mounted QRB base for velcro competition belts, velcro applied as standard, screw holes available for fixed mount.

For both QRB bases, there is a range of compatible different-size mounting plates for any application:

• The single-row QRS plate is for all MAGLOAD loaders and other accessories like magazine pouches, with 3x bolt holes.
• The triple-row QRT plate is for people who are moving to this system from a Tek Lok or Hoppner & Schumann belt clip and want the same layout.
• The ball joint QRA plate is for angle-adjustable single-hole mounting such as magazine pouches. Designed specifically for the Double Alpha XiP and Race Master pouches
• The Clic One plate is one plate to fit on all QRB bases, one slot for adjustability and versatility, sized for the QRB 2.0".

Clic uses captured nuts for easy assembly. The clips can be used with hex bolts instead of nuts should you want threaded studs, and can be configured in many ways to suit what you need. All the hardware we supply is marine-grade stainless steel for maximum weather protection. Solo is 60x24mm, 14.5mm deep, and sits 5.5mm from the belt. QRB 1.5" is 60x24mm, 16.5mm deep, and sits 7.5mm from the belt. QRB 2.0" is 72x24mm, 20mm deep, and sits 11mm from the belt. All clips and Solo come with 2x nuts, 2x bolts, and 2x spacers.

• Fast loading of magazines
• No need to handle ammunition
• Tip and shake up to a 100 rounds into the hopper
• Works with many types of .22 rifles and pistols

The Lightnin' Grip Loader from McFadden Machine is a versatile .22LR speedloader compatible with 30+ different magazine types using interchangeable adapters. It's currently the fastest speedloader for .22LR magazine in production, you can load a 25 round magazine in 10-15 seconds.

McFadden Lightning Grip adapters are sold separately. Please make sure you order the correct adapter for your magazine(s) to go with your loader.

Adapters can be quickly changed by depressing the locking button on the loader and swapping in a new one. They are also compact so it is easy to keep a few different sizes on your range bag.

Adapters:

• #M0 Magload AR-22 (Compatible with and without AR-22 Adapters fitted) (Not Compatible with Tippmann AR-22 Adapter)
• #M1 Magload AR-22 Tippmann (Compatible with our AR-22 Magazine and Tippmann AR-22 Adapter fitted only, not compatible with original Tippmann magazines)
• #M2 Magload K22 Grand Power
• #1 S&W M&P 15-22
• #2 AR15 .22LR  (including Black Dog, Kriss DMK-22, Sig 522, CMMG and Lantac magazines)

• Polymer Construction
• Split Shell Screwed Design
• 31 Round Capacity
• Last Round Bolt Hold Open
• Enlarged Feedlips For Durability
• Designed For Reliability
• Adapters Available Here
• AR-22 Bolt Catch Available Here

The Magload AR-22 Magazine is designed from the ground up for competition .22lr AR-15 rifles, have increased reliability, increased durability, and increased capacity to 31 rounds as standard.

Enlarged feed lips and improved polymer blend to reduce wear, giving longer-lasting magazines. Split shell, screwed injection moulded design allowing disassembly for inspection and cleaning. Developed with and tested by some of the best shooters in the world.

Compatible with the S&W 15-22 and Better-Mag adapter-fitted rifles out of the box, with no adapters or additional accessories required. The magazine also features the ability to attach our proprietary AR-22 Adapters for compatibility with CMMG .22 converted rifles (without the Better-Mag adapter fitted), Tippmann M4-22, Kriss Defiance, JP Enterprises JP-22, and Nordic Components NC-22/RB-22.

Retain the last round bolt hold open with our AR-22 Bolt Catch, not required when using our magazines with the S&W 15-22 or Better-Mag adapter.

Easily load your AR-22 with either the Tippmann or McFadden Speed Loader. The McFadden loader requires our own specific adapters, either the #M0 or #M1, depending on the configuration. Both are available here.  

Configuration Compatibility 

• AR-22 Magazine Only - S&W M&P 15-22 and rifles fitted with a Better-Mag Adapter.
• AR-15 Adapter - All rifles using CMMG, BoreBuddy, Spikes, or Ciener .22lr bolts, without the Better-Mag Adapter. 
• JP/Nordic Adapter - All rifles using JP Enterprises or Nordic Components .22lr bolts.
• Tippmann Adapter - All models of Tippmann Arms M4-22. 
• Kriss Adapter - All models of Kriss Defiance DMK  

NOTE: For orders to the USA the magazine must be ordered with an adapter fitted. 'AR-22 Magazine Only' configuration can not be shipped to the USA

NOTE: If you would like your magazine to be restricted to 10 rounds for regional compliance, please leave a note on your order.

Please don’t call it a charger or a clip, it’s a magazine!

• Firing Pin and Spring
• Heat Treated Steel
• Improved Design for Reliability
• Enlarged Hammer Contact Area
• Dry fire safe

The Magload RELIAPIN is an upgraded firing pin and spring for your .22lr rifle. Designed for greater reliability and longevity, our heat-treated steel firing pin won't let you down. Reduce both firing pin and firing pin spring breakages with the RELIAPIN! Special material, geometry and spring means that the RELIAPIN will last much longer than other pins. The improved hammer contact area and firing pin protrusion are tuned for reliability for when you need it the most. Available for:

• Smith and Wesson M&P 15-22
• CMMG .22 Conversion Kit and Bolt
• Kriss Defiance DMK
• Sig Sauer 522

The 15-22 Reliapin features an enlarged hammer contact area giving greater reliability with all aftermarket AR15 triggers. Proprietary improved firing pin & spring included with all firing pins. Developed with and tested by some of the best shooters in the world. Safe for dry fire!

Quick detach CLIC breech flag holders for 12g or .22lr and .223 breech flags, both can also be used as convenient glasses holders! Quickly switch between breech flag holders with CLIC. Compatible with the Magload Clic system, will require a CLIC QRB belt clip attachment or CLIC Security Buckle. 

• CLIC 12g Holder fits Magload 12g flags
• CLIC .22/.223 Holder fits Magload .22 and .223 flags

Click here for the Quick Release Base this clip attaches to.

*flag not included unless selected as an option

• Occupies the chamber to show the chamber is clear
• Suitable for all .22 chambers
• Rail mount for when not in use
  
• Optional flag holder

Secure the action with the rail mount .22 breech flag! Designed to stand off from the bolt face to protect your extractor and a relief cut on the underside to protect barrel mounted ejectors, such as the one on a Smith and Wesson M&P 15-22.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection, or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.

• Durable Kydex Construction
• Adjustable Retention
• Versatile Ambidextrous Mounting Slots
• Clic Belt Clips Available Here

Designed specifically for IPSC, 3 Gun and USPSA disciplines to offer secure and reliable retention for your rifle magazines.

Currently available are; - S&W 15-22 Pouch: Compatible with our AR-22 magazines (without adapters fitted) and 15-22 magazines. - AR-15 Mil-Spec Pouch: Compatible with our AR-22 magazines (with adapters fitted) and mil-spec magazines (tested with all PMAG, Kriss DMK, Tippmann M4-22, Blackdog, Lancer, Stanag).

Moulded Kydex construction, from P1 2mm Kydex T, with rubber washers for adjustable retention. Each pouch features mounting slots on both sides for attaching to a range of belt clips including Tek Lok, Safariland ELS, and our own CLIC system. Offering up to 45 degrees of angle adjustment on the belt clip. We recommend using our CLIC Drop Link to lower the magazine for a more ergonomic grab and either a CLIC SOLO for a static mount or a CLIC QRB + QRS for quick-release mounting.

Lifetime warranty as standard.

Note: Belt clip attachments are sold separately here. For a static mount, we recommend a Clic Solo, for quick detach, we recommend a CLIC QRB + QRS. In addition to either we would also recommend a CLIC Link to lower the pouches from the belt for a more ergonomic grab.

Easily increase your stock Smith & Wesson M&P 15-22 magazines from 25 rounds to 31 rounds with our +6 extension base. This enables you to use the full 30rd capacity for IPSC competition whilst having an extra round for the chamber on a loaded start.

Made out of our special high durability and low friction, lightweight polymer these competition components are made to give you an edge.

It is recommended to use an external load assist device with this kit as the original load assist button is no longer used.

(Magazine not included)

• Purpose made for the fastest reloads
• Hyper-lightweight polymer construction
• Secure dual screw retention
• Range of colours available

Significantly decrease your reload times. Hyper lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag, as little as possible to catch or snag!

Lifetime guarantee as standard.

The "Mil-Spec" standard does not actually define where a magwell fits, so known, tested good fit for the Mil-Spec magwell (may fit others):

• Kriss Defiance
• Nordic NC-15
• Guncraft .22WMR
• Most cast lowers
• Aero Precision
• CMMG MK4

• Stiff, rigid with little flex

• Two-part velcro design

• Compatible with CLIC, Double Alpha, Tek Lok and Safariland Belt Clips

• 1.5" Width, rectangular profile

• CLIC security buckle and Magload PVC patch included

Designed from the ground up to be the stiffest, lightest two-piece shooting belt on the market, giving superb support to any accessories you want to mount. Perfect for IPSC, USPSA, 3 Gun, and other competitive shooting disciplines. 

"The Stiffy" 2-part IPSC belt is 1.5" wide and only 0.25" thick, making it compatible with CLIC, Tek Lok, Double Alpha, and Safariland belt clip systems. Ideal for handgun, rifle or shotgun shooting. The two-part design uses the highest quality Velcro to ensure a secure attachment every time. Featuring a 5.5" strip of velcro on the front section for any patches.

The inner belt features a chamfer for easy threading through belt loops, a 1mm polymer reinforcing layer for added stiffness and only 3.25mm thick, comfortably worn over any trouser belt. The outer belt also features a chamfer for easy threading through belt loops, a rectangular profile for accessory stability, a strong 4mm polymer reinforcing core and maximum velcro availability on the back. Included with each belt are a CLIC security buckle and a Magload PVC morale patch. Available sizes are:

• 105cm - (Fits waist size 26-35") - 284g
• 121cm - (Fits waist size 32-41") - 312g
• 136cm - (Fits waist size 38-47") - 325g
• 151cm - (Fits waist size 43-53") - 399g
• 176cm - (Fits waist size 51-63") - 456g

• Consistency of oil with lubricating properties of grease
• High level of corrosion protection
• Extreme temperature performance: From -18C to 230C
• Extremely low “stiction”
• Suitable for a wide range of metals and plastics

MagLube is a high-performance, premium gun oil with the lubricating properties of grease but the consistency of oil. MagLube is for the demanding conditions of practical shooting with high round counts and extreme temperature conditions. Use on all sliding and working parts of the gun and feel the difference instantly.

It maintains extremely high lubricity under all conditions. Even when frozen retains exceptionally low stiction and high lubrication qualities.

Ultra-low stiction, high adhesion, and high shear strength are the main features of Maglube.

•  Low stiction means parts move easier, triggers feel smoother, and actions work more reliably.

• High shear strength means that under the pressure of firing or cycling the oil will continue to lubricate rather than being pushed outwards.

•  High adhesion means even a thin layer will stay where you put it, and continue working until you clean it off.

MagLube holds dirt in suspension. When applied to clean parts, subsequent cleaning just requires a wipe with a dry microfibre cloth or tissue paper, and clean & fresh oil can be reapplied over the top.

Maglube is skin safe for worry-free field stripping.

All sizes have a child-safe cap with a thin-tip applicator for getting to hard-to-reach places.

• Purpose-made for practical shooting
• Hyper-lightweight polymer
• Secure retention
• Range of colours available

A slimmed-down version of our popular PRO magwell, our Mil-Spec Element Magwell gives you the same ease of loading without the cutout and enlarged flares of the PRO for a sleeker look. Hyper lightweight and self-lubricating polymer will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!

Made using our high-tech material processes with specially selected polymers, each magwell is hand-checked and has a lifetime guarantee!

The "Mil-Spec" standard does not define where a magwell fits, so known, tested good fit for the Mil-Spec magwell (may fit others):

• Kriss Defiance
• Nordic NC-15
• Guncraft .22WMR
• Most cast lowers
• Aero Precision
• CMMG MK4

• Carbon Fibre Tube
• Nylon Nut and End Cap
• Starting from just 95g in Weight
• Designed Specifically for the 15-22
• Certified M-LOK Slots Available
• Handguard Removal Tool Sold Separately Here

Specifically designed for the Smith & Wesson M&P 15-22, compatible with all versions. 

Super lightweight with our 11" M-LOK version coming in at a mere 95g! The standard 15-22 Sport handguard for comparison weighs 155g. 

Designed to have a factory fit to minimise flex issues that are so common with AR-15 conversion nuts, and to isolate as much of the handguard movement from the barrel as possible.

Precision machined certified M-LOK slots for maximum versatility, licensed by Magpul. Our handguards have an outer diameter (OD) of 45mm and inner diameter (ID) of 38mm.

Note: Handguard removal tool sold separately here.

Note: The handguard measurements are exactly 10.7" for the 11" version and 14.7" for the 15" version. This is to give you clearance for any muzzle accessories.

• 45-degree reduced throw
• High-quality polymer construction
• Ambidextrous
• Long and short levers included

Reduce the throw of your safety to 45 degrees to increase speed and ease of operation. Fully ambidextrous for both right and left-handed setups.

The control surfaces are plastic, so they keep a consistent temperature whether in cold or hot weather and stay grippy when wet in the rain. Manufactured using high-quality polymer, reinforced with a brass thread insert, with a choice of long or short offhand levers, you can be ready to go with a Magload 45-degree safety.

Compatible with all mil-spec AR15s, the Kriss Defiance and Gen 3 (serial numbers 18,000 and above) Tippmann M4-22.

Lifetime warranty as standard.

• Hyper-lightweight
• Designed specifically for .22lr and .22 WMR
• Available in 1/2x20 UNF and 1/2x28 UNEF threads
• Available in 3/4" and 1" sizes

We took compensator science back to its roots to use the small amount of gas produced by a .22 round, bringing you a compensator that will keep your muzzle perfectly flat.

SLS printed to create geometry that’s impossible to machine, keep weight down, and make it economically priced. 

Both 3/4" and 1" brakes come with a timing nut for proper alignment with the barrel.

Available in 1/2x20 UNF and 1/2x28 UNEF threads.

• UNEF fits most AR-15 type .22 rifles - We can confirm the Smith and Wesson 15-22, Kriss Defiance, and Tippman M4-22 have 1/2x28 UNEF threads.

• UNF fits most other .22 rifles - We can confirm the Ruger 10/22 has 1/2x20 UNF threads.

Torture tested with a rapid 500 rounds and guaranteed for 10,000 rounds:

• Designed specifically for the Tippmann M4-22
• Hyper-lightweight polymer
• Secure retention

A slimmed-down version of our popular PRO magwell, designed from the ground up for the Tippmann M4-22 rifle, significantly decreases your reload times and giving you a competitive edge.

Hyper lightweight and constructed from a self-lubricating polymer that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!

Each magwell is hand-checked and comes with a lifetime guarantee.

• Pocket sized
• Lightweight and durable
• Squeeze and drop in a round - 1 per second
• Fits almost all standard pistol magazines

This universal pistol magazine loader and unloader takes all the thumb work out of loading magazines. Anyone who has loaded full mags with mighty springs like new Glock mags will not look back after trying one. Loads all calibres between 9mm and 45 ACP size (9mm, .357 Sig, 10mm, .40, and .45ACP) including 1911 mags for almost all manufacturers. Also loads most .380 double stack magazines. Works with magazines from the following manufacturers: Astra, Auto Ordnance, Arex, Barak, Beretta, Browning, Bul, Colt, CZ, EAA, FN, Glock, HK, Hi-Point, High Standard, Jericho, Kahr, Kel-Tec, Kimber, Les Baer, Llama, Luger, Magnum Research, Para Ordnance, Phoenix Arms, Ruger, Sigma, Sig/Sauer, S&W, Springfield Armory, Star, Steyr, Taurus, Vector, Walther. Will not work with the following models:

• Glock G36 6 round
• Glock G37, G38 or G39 in .45 GAP
• Kel-tec PMR-30
• Luger P08 in 9mm
• S&W 7 round 9mm for models 908, 3913, 3953 & 3954

Will not load cartridges longer than 33mm or magazines with feedlips narrower than 8mm.    

• Strong polymer construction
• Zero modification, fully reversible
• Ergonomic design
• 4 stainless steel bolt locking
• Can be individually numbered/marked

Our bases are ergonomically designed for better grip whilst loading and unloading, the bases add significantly more grab space to make loading as easy as possible. The Ruger 10/22 Magazine Base design stems from the needs of top-level Speed Steel and Steel Challenge competitors. Available individually or in a pack of 6. 

To fit, push the base on, aligning the tab on the base to the tab on the magazine. Screw-in two diagonally opposed screws, the first screw won't bite but the second screw will. Then tighten the other two screws.

If you would like to mix and match colours within the 6x bundle please leave a note on the order

As standard, our bases come with the Magload lifetime warranty.

• Enlarged and flared for the fastest reloading possible
• Designed specifically for the unique BAD receiver design
• Hyper-lightweight polymer construction
• Secure clamshell retention

Enlarged and flared magwell for the unique Battle Arms Development receiver design. Including the Authority Elite, OIP, and Ambi. Featuring geometry for maximum compatibility with the Magpul D60/D50 drum magazine!

Hyper-lightweight, self-lubricating polymer will never slow you down. Security is ensured by a dual bolt fastening clamshell design. 

Each magwell is hand-checked and comes with a lifetime guarantee!

• Completely upgrade your S&W 15-22
  

• Choice of either Element or Pro package

• Range of colours available

Want to completely transform your Simth & Wesson M&P 15-22? We're proud to bring you TWO upgrade packages to choose from 

The ELEMENT package includes:

• 15-22 Element Magwell
• 15-22 +6rd Magazine Extension
• 15-22 45 Degree Safety Selector
• .22 Rail Mount Breech Flag

The PRO package includes:

• 15-22 Pro Magwell
• 2x 15-22 +6rd Magazine Extensions
• 15-22 45 Degree Safety Selector
• Ambi Magazine Release
• 1/2-28 UNEF Muzzle Brake
• .22 Rail Mount Breech Flag

For more information, please see the individual product pages.

Please note: All breech flags are supplied in yellow, and muzzle brakes in black.

• Purpose made for the fastest reload possible
• Cut out for Black Dog drum mag
• Hyper-lightweight polymer construction
• Secure retention
• Carbon black finish

Enlarged and flared magwell for the Lantac LA-SF15. Hyper-lightweight, self lubricating polymer construction. Security is ensured by dual bolt fastening.

Each magwell is hand checked and comes with a lifetime guarantee.

• Ultra lightweight
• Optimised sight picture for IPSC
• Low profile
• Tough Polymer Construction

Purpose built flip-up sights for IPSC/USPSA rifle and mini rifle, low profile and ultra lightweight. Ideal for a first set of primary IPSC sights or backup/offset sights. With both front and rear sights being elevation and windage adjustable you can find the perfect position for your eye and cheek weld. Front Sight:

• Ultra-lightweight 14.8g
• NATO / Picatinny rail mount
• Pro P4 style post, 2.5mm post with 1.5mm aperture, always in the centre of the hood
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

Rear Sight:

• Ultra-lightweight 14.2g
• NATO / Picatinny rail mount
• 1.75mm aperture with single light trap
• Mil-spec height over bore, also available in 2/3 and 1/3 heights
• Stepless elevation and windage adjustable with a 2mm hex key

45 Degree Offset

• Same sights as above
• Front 16.5g, rear 15.9g
• Calculated sight position to be a perfect 45 degree rotation from the centre of the bore

• Fits All AR-15s, 15-22, Kriss Defiance & Tippmann M4-22
• Oversized Right Side Button
• 3 Button Styles Supplied (Flat, Curved and Honeycomb)
• Drop-In Upgrade No Modification Necessary

The Magload enlarged AR15 magazine release button set is compatible with ALL mil-spec AR-15 lowers, including the Smith & Wesson 15-22, Kriss Defiance, and Tippmann M4-22.

3 different omnidirectional button shapes, oversized that can be pushed from multiple directions, are included to suit you and your rifle (flat, curved, and honeycomb), treat yourself to a variety of colour choices.

Dual screw design for easy and secure fitment.

Fit within seconds with absolutely no modification necessary and all tools included!

• Purpose made for the S&W 15-22
• Hyper lightweight polymer
• Secure retention

A slimmed down version of our popular PRO magwell, our 15-22 Element Magwell gives you the same ease of loading without the cutout and enlarged flares of the PRO for a sleeker look. Designed for the Smith and Wesson 15-22 rifle, significantly decrease your reload times, giving you the competitive edge.

Hyper lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag - as little as possible to catch or snag!

Lifetime guarantee as standard.

• Effortless reloads

• Cut out for D60/D50 compatible

• Hyper-lightweight polymer construction

• Secure retention

Flared magwell for the JP Enterprises CTR-02 with internal geometry to make reloads effortless. Hyper-lightweight, self-lubricating polymer construction that will never slow you down. Compatible with Magpul D60/D50 drum magazine.

Security is ensured by dual bolt fastening. 

Backed by the Magload lifetime guarantee.

• +7rd extension gives you 17rds total
• Highly durable and lightweight polymer
• Base and follower kit
• +6 extensions for 25 round magazines available here

Easily increase your Smith & Wesson M&P 15-22 10-round magazine from 10 rounds to 17 rounds with our +7 extension base. This enables you to maximise the rounds in the magazine while still being low-profile enough to go prone.

The minimal added length is enough to get in and out of a magwell comfortably, while the extra weight encourages it to drop free when released. High durability and low friction polymer construction.

It is recommended to use an external load assist device with this kit, as the original load assist button is no longer used.

Note: Compatible with 10-round 15-22 magazine only, 25-round extensions can be found here.

Note: Magazine not included

• Purpose made for the S&W 15-22
• Cut out for drum mag
• Hyper lightweight polymer
• Secure retention

Designed from the ground up for the Smith and Wesson M&P 15-22 rifle to significantly decrease your reload times.

Featuring cutouts for the Black Dog Machine drum magazines and additional flares over the Element Magwell, the PRO is designed for ultimate performance.

Hyper-lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag, as little as possible to catch or snag!

Lifetime warranty as standard.

• Fits All AR-15s, 15-22, Kriss Defiance & Tippmann M4-22
• Low Profile Left Side Button
• Oversized Right Side Button
• 3 Button Styles Included (Flat, Curved and Honeycomb)
• Drop-In Upgrade No Modification Necessary

The Magload ambidextrous magazine catch is compatible with ALL mil-spec AR-15 lowers, including the Smith & Wesson 15-22, Kriss Defiance, and Tippmann M4-22. 3 different omnidirectional button shapes are included to suit you and your rifle (flat, curved, and honeycomb), treat yourself to a variety of colour choices.

This ambi mag release gives you a low-profile left-hand button and an oversized right-hand button that can be pushed from multiple directions.

Dual screw design for easy and secure fitment. Fit within seconds with absolutely no modification necessary and all tools included. Lifetime warranty as standard.

• 45 degree reduced throw
• High-quality polymer construction
• Ambidextrous
• Long and short levers included

Reduce the throw of your Smith and Wesson M&P 15-22 safety to 45 degrees, increasing the speed and ease of operation. Fully ambidextrous for both right and left-handed setups.

The control surfaces are plastic, so they keep a consistent temperature whether in cold or hot weather and stay grippy when wet in the rain. Manufactured using high-quality polymer, reinforced with a brass thread insert, with a choice of long or short offhand levers.

Lifetime warranty as standard.

• Occupies the chamber to show the chamber is clear
• Suitable for all .223 chambers
• Rail mount for when not in use
• Specifically shaped to clear the extractor
• Optional flag holder

Secure the action with the Magload breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel-locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro for easy mounting.

Want to buy someone a gift but no idea what to get them? Let them choose with a MAGLOAD digital gift card! Never expires, and reusable!

• Purpose made for the fastest reloads
• Hyper-lightweight polymer construction
• Secure dual screw retention
• Range of colours available

Designed from the ground up for the Kriss Defiance DMK22C rifle, significantly decreasing your reload times.

 Hyper-lightweight and self-lubricating polymer construction that will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag, as little as possible to catch or snag!

Each magwell is hand checked and comes with a lifetime guarantee.

• Designed specifically for the Tippmann M4-22
  
• Hyper-lightweight polymer
• Secure retention

Pro Magwell for the Tippmann M4-22. Hyper-lightweight, self-lubricating polymer will never slow you down. Security is ensured by dual bolt fastening. Designed like all our products for low drag, as little as possible to catch or snag.

Each magwell is hand checked and comes with a lifetime guarantee.

• Made from durable and long lasting vinyl
• 1” x 8”
• 10 colours available
• Official Magload font

Our official Magload vinyl sticker, perfectly sized to fit on your shotgun magazine tube, receiver, handguard, stock or even your car!

We’ve been using these stickers for Team Magload, and even with our high standards, they can live up to whatever has been thrown at them.