• Extremely light and predictable pull
• High and adjustable retention
• Lightest self-adjusting loader in the world, from 92g
• Velcro Competition Belt Available Here
• Huge variety of mounting and assembly options
• Tool-free self-adjustment for all usable cartridge lengths

The Nexus PRO is highly decorated, being used by multiple current and past world and national champions, which is why we can confidently call it the Choice of Champions!

The Nexus PRO quadloading system is our ultimate loader, lighter than any other spring adjustable loader on the market. Completely UK made, set-and-forget, left and right-handed shotgun cartridge caddy in 4, 8, 12, 14, 16, 20, 24, 28, and 32 options.

The Nexus PRO comes with:

• Your loader
• PS51 Industrial Velcro, cut to size, with an alcohol swab
• Belt clip spacers
• 10mm and 5mm spring adjustment spacers

We recommend a full belt setup would be a 12 and a 28 loader. This gives your initial load and still enough to complete even the longest of stages. Note: Velcro Competition Belt or belt clips are sold separately.

DESCRIPTION

Nexus PRO is a set and forget system which will take any cartridge with an unfired length from 50-67.5mm (most manufacturers will quote the fired cartridge length in their technical date). That means any cartridge, bird, buck or slug that you would use in training or competition will fit in the Nexus PRO system with no further adjustment. The Nexus system can be set up either left or right-handed and changed at any time using just one Allen key. The Nexus PRO is highly decorated, being used by multiple current and past world and national champions, which is why we can confidently call it the Choice of Champions!

The Nexus PRO is built with IPSC and USPSA in mind and therefore conforms perfectly to IPSC and USPSA rules, but the Nexus PRO is even more suitable to 3 Gun and other disciplines than ever before. Competitors have been using the Nexus PRO in it's 4up and 8up configurations with great success in 3 Gun and other multigun disciplines.

Versatility

• Can be set up right or left-handed
• Load twins or quads whenever you want
• Self adjusts to fit any cartridge used in dynamic shooting
• Can be fitted to CLIC, Tek Loks, ELS clips or our  Velcro Competition belt
• Fully Modular
• Adjustable spring tension and hand clearance
• 4, 8, 12, 14, 16, 20, 24, 28, and 32 round configurations available

Construction

• Aerospace-grade aluminium backplate, hard anodised
• The Nexus PRO is just 50mm from front to back, including cartridges (49mm without). There is no danger of exceeding the IPSC 75mm rules even with a loose belt or a thick attachment mechanism (Tek Lok or Velcro).
• The plastic parts are made using the latest in 3D manufacturing technology. From -50 degrees C, to 150 degrees C; the Nexus PPRO will always work as you expect it to!
• Minimal maintenance is required. Self-cleaning even through the thickest of mud and sand.
• We are using the latest in materials technology to utilise spring systems that will be long lasting and corrosion-free.

Easy to use

• The Nexus PRO can be supplied in a ready-to-assemble state with clear and comprehensive instructions or assembled for you in a right or left-handed configuration.
• Set and forget. Once the loader is assembled it never needs to be adjusted as it will self adjust to any usable cartridge length.
• Low release force and natural release directions.
• When emptied of ammo the loader collapses down to the smallest possible footprint. An empty loader will not get in the way during bending, crouching or any other form of PSG acrobatics.

Weights: PRO4 92g, PRO8 178g, PRO12 265g, PRO14 305g, PRO16g 354, PRO20 428g, PRO24 527g, PRO28 617g, PRO32 695g

As standard, the Nexus PRO comes with our lifetime warranty.

• High retention cupped bases and double magnets
• Extremely consistent and predictable pull
• Re-configurable between left and right hand
• High-grade aluminium backplate and bars
• Modular and upgradeable
• Tool-free self-adjustment for all usable cartridge lengths
• Lifetime warranty

Our next-generation Nexus Element Gen II shotgun caddies are focused on retention without compromising your load. Featuring double magnets and cupped bases to grip when it matters. Gen II moves to aluminium backplates and bars, producing the lightest loader we have ever made! Completely UK-made, set-and-forget, switchable between left or right-hand, and available in 8, 12, 20, 28, and 32 options.

The Nexus Element Gen II comes with:

• Your loader
• PS51 Industrial Velcro, cut to size, with an alcohol swab
• Belt clip spacers

We recommend a full belt setup should be a 12 and a 28 loader. This gives your initial load and still enough to complete even the longest of stages.

Nexus Element Gen II is a set and forget system that takes any cartridge with an unfired length from 51-67.5mm (most manufacturers quote the fired cartridge length). That means any cartridge, bird, buck, or slug you would use in training or competition will fit in the Nexus system with no further adjustment. You don't have to commit to loading either right or left-handed, it takes just 10 minutes to convert an assembled Nexus 12 from one hand to the other.

In line with MAGLOAD ethos, the Nexus Element Gen 2 is versatile, well built, easy to use, and is the most affordable system on the market. Compliant with all IPSC and 3 Gun competition rules.

Versatility

• Can be set up right or left-handed. All Nexus Element Gen IIs will be supplied assembled. Your loader can be easily reconfigured between right and left-handed setups.
• Load twins or quads whenever you want.
• Set and forget. Once the loader is assembled, it never needs to be adjusted as it will self adjust to any usable cartridge length and any cartridge on the IPSC or 3 Gun circuit.
• Can be fitted to CLIC, Tek Loks, ELS clips or used with our Velcro Competition belt.
• When empty, the loader collapses to the smallest possible footprint. An empty loader will not get in the way during bending or crouching.
• Low release force and natural release directions.

Construction

• Nexus Element Gen II backplate and bars are constructed from hard anodised aluminium.
• Sintered Nylon 12 tops, bushings and bases. There are no practical limits to the heat or cold to which they can be exposed.
•  Long lasting and corrosion-free springs.

As standard, the Nexus Element Gen II comes with our lifetime warranty.

The Clic belt clip system is designed specifically for IPSC, 3 Gun and USPSA disciplines to be rock solid on the belt, with the QRB 1.5" or QRB 2.0" accessories becoming quick and easy to remove with the quick-release function. Clic takes up the absolute minimum amount of space, so you can stack them close together if needed, giving you additional room for belt accessories.

There are 4 options of bases, the Solo, QRB 1.5", QRB 2.0", or QRB Velcro:

• Clic Solo - For permanent attachment of accessories.
• Clic QRB 1.5" - Quick release base for standard 1.5" 2-part IPSC belts.
• Clic QRB 2.0" - Adjustable quick-release base for any 1.0"-2.0" belts in 0.25" increments with supplied spacers.
• Clic QRB Velcro - Velcro mounted QRB base for velcro competition belts, velcro applied as standard, screw holes available for fixed mount.

For both QRB bases, there is a range of compatible different-size mounting plates for any application:

• The single-row QRS plate is for all MAGLOAD loaders and other accessories like magazine pouches, with 3x bolt holes.
• The triple-row QRT plate is for people who are moving to this system from a Tek Lok or Hoppner & Schumann belt clip and want the same layout.
• The ball joint QRA plate is for angle-adjustable single-hole mounting such as magazine pouches. Designed specifically for the Double Alpha XiP and Race Master pouches
• The Clic One plate is one plate to fit on all QRB bases, one slot for adjustability and versatility, sized for the QRB 2.0".

Clic uses captured nuts for easy assembly. The clips can be used with hex bolts instead of nuts should you want threaded studs, and can be configured in many ways to suit what you need. All the hardware we supply is marine-grade stainless steel for maximum weather protection. Solo is 60x24mm, 14.5mm deep, and sits 5.5mm from the belt. QRB 1.5" is 60x24mm, 16.5mm deep, and sits 7.5mm from the belt. QRB 2.0" is 72x24mm, 20mm deep, and sits 11mm from the belt. All clips and Solo come with 2x nuts, 2x bolts, and 2x spacers.

• Secure and easy to use buckle
• Rapid fastening and adjustment
• Premium 6mm thick rubber and cork construction, with a grippy inner surface and genuine Velcro outer
• Compatible with all Nexus and Reflex loaders

SIZING: Measure around where you will wear the belt (around the belly button) + clothes and order the largest belt that will fit you.

The sizes accommodated are:

• Small 26-44" (18" of belt space)
• Medium 34-54" (26" of belt space)
• Large 42-60" (32" of belt space)

Everyone knows how to use a seat belt, and everyone knows how secure a seat belt is. Quick to fasten and quick to adjust. Avoid the faux pas of a belt coming off in IPSC, USPSA and 3 Gun competition by using the MAGLOAD Velcro Competition Belt.

Using our proprietary rubber and cork core construction, we’ve thinned this belt down to a mere 6mm, further reducing weight and increasing your range of movement without sacrificing rigidity for your loaders. 100mm wide genuine Velcro ensures that your loaders and accessories stay where you put them.

Supplied with a Magload PVC Patch and an integrated elastic strap to secure excess webbing.

Nexus PRO loaders are sold separately here

Nexus Element Gen II loaders are sold separately here

Breech Flag and Holder are sold separately here

Note: for the Small size belt, we recommend a maximum two-loader set-up of a 12 and 24, or up to a single 32. Medium and Large sizes will comfortably fit a two-loader set-up of up to a 14 and 32.

• Durable Kydex Construction
• Adjustable Retention
• Versatile Ambidextrous Mounting Slots
• Clic Belt Clips Available Here

Designed specifically for IPSC, 3 Gun and USPSA disciplines to offer secure and reliable retention for your rifle magazines.

Currently available are; - S&W 15-22 Pouch: Compatible with our AR-22 magazines (without adapters fitted) and 15-22 magazines. - AR-15 Mil-Spec Pouch: Compatible with our AR-22 magazines (with adapters fitted) and mil-spec magazines (tested with all PMAG, Kriss DMK, Tippmann M4-22, Blackdog, Lancer, Stanag).

Moulded Kydex construction, from P1 2mm Kydex T, with rubber washers for adjustable retention. Each pouch features mounting slots on both sides for attaching to a range of belt clips including Tek Lok, Safariland ELS, and our own CLIC system. Offering up to 45 degrees of angle adjustment on the belt clip. We recommend using our CLIC Drop Link to lower the magazine for a more ergonomic grab and either a CLIC SOLO for a static mount or a CLIC QRB + QRS for quick-release mounting.

Lifetime warranty as standard.

Note: Belt clip attachments are sold separately here. For a static mount, we recommend a Clic Solo, for quick detach, we recommend a CLIC QRB + QRS. In addition to either we would also recommend a CLIC Link to lower the pouches from the belt for a more ergonomic grab.

• Stiff, rigid with little flex

• Two-part velcro design

• Compatible with CLIC, Double Alpha, Tek Lok and Safariland Belt Clips

• 1.5" Width, rectangular profile

• CLIC security buckle and Magload PVC patch included

Designed from the ground up to be the stiffest, lightest two-piece shooting belt on the market, giving superb support to any accessories you want to mount. Perfect for IPSC, USPSA, 3 Gun, and other competitive shooting disciplines. 

"The Stiffy" 2-part IPSC belt is 1.5" wide and only 0.25" thick, making it compatible with CLIC, Tek Lok, Double Alpha, and Safariland belt clip systems. Ideal for handgun, rifle or shotgun shooting. The two-part design uses the highest quality Velcro to ensure a secure attachment every time. Featuring a 5.5" strip of velcro on the front section for any patches.

The inner belt features a chamfer for easy threading through belt loops, a 1mm polymer reinforcing layer for added stiffness and only 3.25mm thick, comfortably worn over any trouser belt. The outer belt also features a chamfer for easy threading through belt loops, a rectangular profile for accessory stability, a strong 4mm polymer reinforcing core and maximum velcro availability on the back. Included with each belt are a CLIC security buckle and a Magload PVC morale patch. Available sizes are:

• 105cm - (Fits waist size 26-35") - 284g
• 121cm - (Fits waist size 32-41") - 312g
• 136cm - (Fits waist size 38-47") - 325g
• 151cm - (Fits waist size 43-53") - 399g
• 176cm - (Fits waist size 51-63") - 456g

Quick detach CLIC breech flag holders for 12g or .22lr and .223 breech flags, both can also be used as convenient glasses holders! Quickly switch between breech flag holders with CLIC. Compatible with the Magload Clic system, will require a CLIC QRB belt clip attachment or CLIC Security Buckle. 

• CLIC 12g Holder fits Magload 12g flags
• CLIC .22/.223 Holder fits Magload .22 and .223 flags

Click here for the Quick Release Base this clip attaches to.

*flag not included unless selected as an option

• Occupies the chamber to show that the chamber is clear
• Compact design
• Flag holder holds all breech flags
• Suitable for all 12g chambers

Suitable for all 12g shotguns, secure the action with the MAGLOAD breech flag!

Featuring a relief to clear the extractor, preventing damage. Designed to have a compact size and accommodate a hole for any keyring you may want to hang from it.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial Velcro and also holes for direct attachment.

• Polymer Construction
• Easier Latch Operation
• Drop-In Upgrade

Flick your holster lock on and off with ease with our enlarged holster lock lever, add a bit of flair and colour code your holster blocks too! 

Simple installation in under 2 minutes, no modification required and easily reversible.

Compatible with Double Alpha Racemaster and Alpha X holster blocks, please ensure your trigger guard does not extend out of the back of your block or the enlarged lever will foul.

• Aluminium Reflex Loader backplates
• Compatible with Reflex Loader

Combine or split out your Reflex Loader modules to a new size with additional backplates.

Made from high-grade aluminium, with a hard black anodised finish.

• Occupies the chamber to show that the chamber is clear
• Suitable for all 12g chambers
• Rail mount for when not in use
• Specifically shaped to clear the extractor
• Flag holder can be attached with velcro (supplied) or by bolting to a Tek Lok or directly to the belt

Secure the action with the Magload rail mount 12g breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.

• Occupies the chamber to show the chamber is clear
• Suitable for all .22 chambers
• Rail mount for when not in use
  
• Optional flag holder

Secure the action with the rail mount .22 breech flag! Designed to stand off from the bolt face to protect your extractor and a relief cut on the underside to protect barrel mounted ejectors, such as the one on a Smith and Wesson M&P 15-22.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection, or sunglasses. It comes with industrial velcro but also a set of bolts for Tek Lok or direct attachment.

• Occupies the chamber to show the chamber is clear
• Suitable for all .223 chambers
• Rail mount for when not in use
• Specifically shaped to clear the extractor
• Optional flag holder

Secure the action with the Magload breech flag! Designed to stand off from the bolt face to protect your extractor and clear the barrel-locking lugs so you can drop the bolt on the flag without breaking it.

Stow the flag easily with one of our breech flag holders or on your accessory rail. Designed to fit both Picatinny and NATO rail specifications, clip it on and off while shooting your stage.

The breech flag holder is a holder for your breech flag, eye protection or sunglasses. It comes with industrial velcro for easy mounting.

• Worlds First Self Collapsing Loader
• 4, 8 and 12 Capacity Available
• Left/Right Hand Switchable
• Variety Of Mounting Options
• REFLEX Option 3 Loader Available Here

Welcome to REFLEX, the world's first self collapsing quad and dual shotgun loader.

Designed for the 3-Gun and IPSC market the REFLEX loader is available as a 4, 8 or 12 round capacity shotgun caddie which completely folds up after deployment. In the collapsed position the REFLEX becomes the world's smallest loader reducing the chance of snagging and making it far easier to go prone or take other positions during a stage. High strength magnets hold your cartridges in place during high energy movements while the light release force means it’s fast to load from.

Constructed from aerospace-grade hard anodised aluminium and polymer for long lasting and corrosion-free use. Minimal maintenance is required, and self-cleaning even through the thickest of mud and sand. The stainless steel collapsing springs have been heat treated for durability. REFLEX can be configured to be right or left-handed in seconds giving you ultimate flexibility in your competition set-up. Weights: Reflex 12 - 311g, Reflex 8 - 207g and Reflex 4 - 103g

Capable of being mounted with a variety of solutions, including CLIC, Tek Loks, other belt clips and Velcro.

Supplied in the box are 1 x REFLEX loader, 2 x attachment spacers, 1 x Velcro piece and 1 x alcohol wipe Lifetime warranty as standard.

• Stainless Steel Nexus Element backplates
• Compatible with original Nexus, Nexus Element, Nexus Element Gen II and Nexus Pro

Combine or split out your Nexus Element modules to a new size with additional backplates. Living up to the modularity of the Nexus system, the Nexus Element backplates are 100% backwards compatible with the Original Nexus and Nexus Pro also.

Made from high-grade stainless steel, with a linished finish.

Part of our CLIC belt clip range, the 12g Holder retains either one (single) or two (double) 12g cartridges for your initial load or for when you've exhausted everything else!

The 12g Holder is quick-release and mounts into the CLIC QRB or CLIC Security Buckle, which can be purchased separately here. Made from a highly durable and lightweight polymer for all conditions. Lifetime warranty as standard.

Click here for the Quick Release Base this clip attaches to.